Yahoo Answers is shutting down on 4 May 2021 (Eastern Time) and the Yahoo Answers website is now in read-only mode. There will be no changes to other Yahoo properties or services, or your Yahoo account. You can find more information about the Yahoo Answers shutdown and how to download your data on this help page.
Kitchen extractor fans - are there any that plug in?
I'm looking for an extractor fan suitable for a small kitchen. Preferably a 100mm - 4" fan to fit an existing hole in the external wall. There are loads to choose from, but I'm looking for one that my father-in-law can plug into a standard mains socket rather than having to pay to get it hard-wired. Any information on suppliers that sell these would be great.
9 Answers
- Anonymous9 years agoFavourite answer
Who says you have to hard wire a fan? There is no reason not to connect a 13 amp plug with flexible cable. Just swap the 13 amp plug fuse for a 3 amp one and you can use two core lighting flex. There is no need for an earth connection as extractor fans are double insulated.
- 6 years ago
This Site Might Help You.
RE:
Kitchen extractor fans - are there any that plug in?
I'm looking for an extractor fan suitable for a small kitchen. Preferably a 100mm - 4" fan to fit an existing hole in the external wall. There are loads to choose from, but I'm looking for one that my father-in-law can plug into a standard mains socket rather than having to pay to get...
Source(s): kitchen extractor fans plug in: https://biturl.im/aUaWG - ?Lv 79 years ago
Electrically it'll be fine running off a plug and socket. Most people hard-wire them simply to avoid having a socket taken up by the fan plug.
- Anonymous5 years ago
We need more detail. Is there an existing fan that you are replacing? If not, then you're going to have to run a new electrical line for the fan and cut a hole somewhere, either in the wall or upwards through a cabinet and then out through the roof. If you already have a fan there, then you just need to take out the old fan (keep an eye on how the wires are connected) and then hook up the old one in it's place.
- KevLECLv 69 years ago
Any fan your describing can be wired via a flex to a plug top & plugged into a socket,just fit a 3A fuse in plug.
We fit vent axia low carbon fans which use just over 1watt to power it, but its a bit pricey to buy I believe, google vent axia, they make lots of fan types.
Source(s): Lecky - Anonymous7 years ago
The amount of power these kitchen's extractor fans uses are the same amount of power as table lamps.
Provided you put a 3 amp fuse in the plug its ok. Builders and electricians would say no because they want to rip you off with a large bill .
- boy boyLv 79 years ago
im a builder ..never seen one ..most kitchen ones have pullcords ..on the unit itself ...a 4" fan wont pull skin off a rice pudding...ADD.if you were building a kitchen the building inspector would not pass it without it being hardwired in ..and its a reg you must have one